Volume 6, Issue 2 (9-2017)                   2017, 6(2): 1-15 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Investigation of mechanical behaviors of zirconia-alumina nanocomposite coating applied on Al 2024 by sol- gel method. Iranian Journal of Ceramic Science & Engineering 2017; 6 (2) :1-15
URL: http://ijcse.ir/article-1-511-en.html
Abstract:   (4247 Views)
Nanocomposite  ceramic-based coatings, due to its high hardness and wear resistance, are improved wear behavior of aluminum and its alloys. In this study, zirconia nanocomposite coating  applied on Al 2024 by using sol-gel method and dip coating process with the use of zirconium propoxide and aluminum tri-sec butylate. Then phase, structural and morphology properties of coatings evaluated by using GIXRD, FTIR, FESEM, AFM, as well as nano-mechanical properties of coatings were investigated by using nano-scratch and nano-indentation at two different loads, such as 50 and 60 mN. Results indicated that the formation of a homogeneous, smooth and low cracked ziconia-alumina nanocomposite coating with a thickness of approximately 800 nm. The presence of alumina cause to enhance the mechanical properties such as hardness and elastic modulus to 1.15 and 15 GPa, respectively, resulting in improve the wear behavior of coating with the friction coefficient of 0.51 and dominate the abrasive with shear mechanism.
Full-Text [PDF 2954 kb]   (1700 Downloads)    
Type of Study: Research | Subject: Bioceramics
Received: 2018/01/20 | Accepted: 2018/01/20

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.