 |
Baharvandi, Hamid Reza
Effect of Al2O3:Y2O3 molar ratio and amount of CaO on the sintering of SiC composite [Volume 12, Number 4] |
 |
Saeedi Heydari, Seyedeh Mina
Effect of Al2O3:Y2O3 molar ratio and amount of CaO on the sintering of SiC composite [Volume 12, Number 4] |
 |
Eshaghian, Raziye
Effect of Al2O3:Y2O3 molar ratio and amount of CaO on the sintering of SiC composite [Volume 12, Number 4] |
 |
mohassel, abbas
Assessing the dielectric and ferroelectric properties of barium titanate produced from barite concentrate and comparing with barium titanate manufactured using commercial raw materials [Volume 12, Number 4] |
 |
setoudeh, nader
Assessing the dielectric and ferroelectric properties of barium titanate produced from barite concentrate and comparing with barium titanate manufactured using commercial raw materials [Volume 12, Number 4] |
 |
Hayati, Raziye
Assessing the dielectric and ferroelectric properties of barium titanate produced from barite concentrate and comparing with barium titanate manufactured using commercial raw materials [Volume 12, Number 4] |
 |
shayanzadeh moghaddam, tahere
Assessing the dielectric and ferroelectric properties of barium titanate produced from barite concentrate and comparing with barium titanate manufactured using commercial raw materials [Volume 12, Number 4] |
 |
Asgary, somayeh
Fabrication and investigation of photodegradation properties of perovskite strontium titanate nanocomposites doped with manganese used to remove acid red and acid black dyes under sunlight [Volume 12, Number 0] |
 |
Ramezani, Amir Hoshang
Fabrication and investigation of photodegradation properties of perovskite strontium titanate nanocomposites doped with manganese used to remove acid red and acid black dyes under sunlight [Volume 12, Number 0] |
 |
Azizieh, Mahdi
Fabrication the ZrB2-HfB2-TiB2 medium entropy and investigation of hardness and fracture toughness [Volume 12, Number 3] |
 |
Kafashan, Hosein
Fabrication the ZrB2-HfB2-TiB2 medium entropy and investigation of hardness and fracture toughness [Volume 12, Number 3] |
 |
Balak, Zohre
Fabrication the ZrB2-HfB2-TiB2 medium entropy and investigation of hardness and fracture toughness [Volume 12, Number 3] |
 |
Jahanbakhsh, Abbas
Fabrication the ZrB2-HfB2-TiB2 medium entropy and investigation of hardness and fracture toughness [Volume 12, Number 3] |
 |
ahangarani, shahrokh
Preparation of self-cleaning, anti-reflective titania-silica nanostructure coating by sol-gel metho [Volume 12, Number 0] |
 |
lari, najme
Preparation of self-cleaning, anti-reflective titania-silica nanostructure coating by sol-gel metho [Volume 12, Number 0] |
 |
Mashhadi, Mehri
Investigating The Effect of Adding TiB2 on Mechanical Properties and Thermal Oxidation Behavior of ZrB2-SiC-TiB2 Nanocomposite Sintered By Pressureless Method [Volume 12, Number 3] |
 |
Vatanparast, Vahid
Investigating The Effect of Adding TiB2 on Mechanical Properties and Thermal Oxidation Behavior of ZrB2-SiC-TiB2 Nanocomposite Sintered By Pressureless Method [Volume 12, Number 3] |
 |
balak, zohre
Fabrication of Medium Entropy (Zr1-2xHfxTix)B2 composite and charectrization of its properties [Volume 12, Number 4] |
 |
adeli ghale, reza
Fabrication of Medium Entropy (Zr1-2xHfxTix)B2 composite and charectrization of its properties [Volume 12, Number 4] |
 |
Heidarian, Adel
Investigating the concentration of compounds containing acid and nitrate / nitrite in the optimization of phosphate bath composition [Volume 12, Number 4] |
 |
Najafi, Abolhassan
Investigating the concentration of compounds containing acid and nitrate / nitrite in the optimization of phosphate bath composition [Volume 12, Number 4] |
 |
Khalaj, Gholamreza
Investigating the concentration of compounds containing acid and nitrate / nitrite in the optimization of phosphate bath composition [Volume 12, Number 4] |
 |
kordestani, elham
Ab-initio Calculation of the Electronic, Optical and Elastic Properties of NiMnSb Compound [Volume 12, Number 4] |
 |
fard alidadi, zeinab
Ab-initio Calculation of the Electronic, Optical and Elastic Properties of NiMnSb Compound [Volume 12, Number 4] |
 |
Salehi, Hamdollah
Ab-initio Calculation of the Electronic, Optical and Elastic Properties of NiMnSb Compound [Volume 12, Number 4] |
 |
Ahmadi Daryakenari, Ahmad
Electrochemical detection of lead ions in water based on manganese oxide nanostructures [Volume 12, Number 3] |
 |
Ahmadi Daryakenari, Mohammad
Electrochemical detection of lead ions in water based on manganese oxide nanostructures [Volume 12, Number 3] |
 |
Noori Afsuran, Sara
Electrochemical detection of lead ions in water based on manganese oxide nanostructures [Volume 12, Number 3] |
 |
Siavashi, Leila
Increasing of corrosion resistance of 316 L steel by amorphous carbon thin film for use in medical implants [Volume 12, Number 3] |
 |
Taheri, Ramezan Ali
Increasing of corrosion resistance of 316 L steel by amorphous carbon thin film for use in medical implants [Volume 12, Number 3] |
 |
Hosseini, Seyed Hojatollah
Increasing of corrosion resistance of 316 L steel by amorphous carbon thin film for use in medical implants [Volume 12, Number 3] |
 |
Nourani, Mohammad Reza
Increasing of corrosion resistance of 316 L steel by amorphous carbon thin film for use in medical implants [Volume 12, Number 3] |
 |
Mersagh Dezfuli, Saeid
Increasing of corrosion resistance of 316 L steel by amorphous carbon thin film for use in medical implants [Volume 12, Number 3] |
 |
farhang rad, farhad
Effect of Short Carbon Fiber (Csf) Addition on Oxidation Resistance, toughness and hardness behavior of Pressureless [Volume 12, Number 3] |
 |
mashhadi, mehri
Effect of Short Carbon Fiber (Csf) Addition on Oxidation Resistance, toughness and hardness behavior of Pressureless [Volume 12, Number 3] |
 |
aminzadeh, abbas
Effect of Short Carbon Fiber (Csf) Addition on Oxidation Resistance, toughness and hardness behavior of Pressureless [Volume 12, Number 3] |
 |
Darab, Mahdi
Using thermoelectric materials for waste heat recovery in proton exchange membrane fuel cells [Volume 12, Number 3] |
 |
Karimi, Fatemeh
Using thermoelectric materials for waste heat recovery in proton exchange membrane fuel cells [Volume 12, Number 3] |
 |
Hosseini, Seyed Hojatollah
Investigation of the structure and properties of diamond-like carbon thin film formed on AISI 4140 steel by ion beam deposition [Volume 12, Number 0] |
 |
mersagh dezfuli, saeid
Investigation of the structure and properties of diamond-like carbon thin film formed on AISI 4140 steel by ion beam deposition [Volume 12, Number 0] |
 |
Eshghi, Mahdi
Gamma ray protective properties of some oxide ceramics using Geant4 Monte Carlo simulator [Volume 12, Number 0] |
 |
Alipoor, Mohammadreza
Gamma ray protective properties of some oxide ceramics using Geant4 Monte Carlo simulator [Volume 12, Number 0] |
 |
Zakeri, Alireza
Characterization of diamond-like carbon coating (DLC) deposited by low voltage electrolytic deposition method with Raman spectroscopy [Volume 12, Number 0] |
 |
Habibzadeh.A.M., Pouria
Characterization of diamond-like carbon coating (DLC) deposited by low voltage electrolytic deposition method with Raman spectroscopy [Volume 12, Number 0] |
 |
Shahedi Asl, Mehdi
Optimizing the effect of sintering parameters and the amount of graphene on the hardness and fracture toughness of ZrB2-SiCn composite by Taguchi method [Volume 12, Number 0] |
 |
Azizieh, Mahdi
Optimizing the effect of sintering parameters and the amount of graphene on the hardness and fracture toughness of ZrB2-SiCn composite by Taguchi method [Volume 12, Number 0] |
 |
Balak, Zohre
Optimizing the effect of sintering parameters and the amount of graphene on the hardness and fracture toughness of ZrB2-SiCn composite by Taguchi method [Volume 12, Number 0] |
 |
Mehdipour, Meysam
Optimizing the effect of sintering parameters and the amount of graphene on the hardness and fracture toughness of ZrB2-SiCn composite by Taguchi method [Volume 12, Number 0] |
 |
kerazi, rasha saad
Layering methods and properties of Tantalum Nitride thin layers: A review [Volume 12, Number 2] |
 |
sari, amirhosain
Layering methods and properties of Tantalum Nitride thin layers: A review [Volume 12, Number 2] |
 |
ramezani, amir hoshang
Layering methods and properties of Tantalum Nitride thin layers: A review [Volume 12, Number 2] |
 |
Sanaee, Zeinab
Study on the effect of utilizing molybdenum disulfide as an electrocatalyst in cathode on the specific capacitance of lithium-oxygen battery [Volume 12, Number 2] |
 |
Ghafari, Mahmoud
Study on the effect of utilizing molybdenum disulfide as an electrocatalyst in cathode on the specific capacitance of lithium-oxygen battery [Volume 12, Number 2] |
 |
Maleki, Mahdi
Study on the effect of utilizing molybdenum disulfide as an electrocatalyst in cathode on the specific capacitance of lithium-oxygen battery [Volume 12, Number 2] |
 |
Homayounfard, Amir Mahdi
Study on the effect of utilizing molybdenum disulfide as an electrocatalyst in cathode on the specific capacitance of lithium-oxygen battery [Volume 12, Number 2] |
 |
Darbandi, Masih
Effect of deep eutectic solvent on the synthesis of nickel oxide nanoparticles [Volume 12, Number 2] |
 |
Najafi, Athar
Effect of deep eutectic solvent on the synthesis of nickel oxide nanoparticles [Volume 12, Number 2] |
 |
Mehrizad, Ali
Synthesis of NiO/Fe3O4 Supported onto Clinoptilolite Zeolite and Evaluating its Performance in the Catalytic Ozonation of Dairy Effluents [Volume 12, Number 2] |
 |
Lak, Rezvan
Investigating the physical and mechanical properties of cement-based composites reinforced with ceramic and polymer exposed to sulfate attack [Volume 12, Number 2] |
 |
Kazemi, Shahb
Investigating the physical and mechanical properties of cement-based composites reinforced with ceramic and polymer exposed to sulfate attack [Volume 12, Number 2] |
 |
Rezvani zadeh, Reza
Investigating the physical and mechanical properties of cement-based composites reinforced with ceramic and polymer exposed to sulfate attack [Volume 12, Number 2] |
 |
Abbasi, Alireza
Effect of milling on microstructure, mechanical properties and wear resistance of Al2O3/Ni cermets [Volume 12, Number 2] |
 |
Moazami-Goudarzi, Mohammad
Effect of milling on microstructure, mechanical properties and wear resistance of Al2O3/Ni cermets [Volume 12, Number 2] |
 |
Naeem Obaid, Sarah
Effect of milling on microstructure, mechanical properties and wear resistance of Al2O3/Ni cermets [Volume 12, Number 2] |
 |
farhang rad, farhad
Investigating the effect of nano SiC particles on fracture toughness and oxidation behavior of ZrB2-ZrC-SiC composite produced by PS method [Volume 12, Number 2] |
 |
Mashhadi, Mehri
Investigating the effect of nano SiC particles on fracture toughness and oxidation behavior of ZrB2-ZrC-SiC composite produced by PS method [Volume 12, Number 2] |
 |
Mashhadi, Mehri
Investigating the effect of nano SiC particles on fracture toughness and oxidation behavior of ZrB2-ZrC-SiC composite produced by PS method [Volume 12, Number 2] |
 |
Hosseini moradi, SeyedAli
Synthesis of Mn2V2O7 hollow microsphere as a high performance electrode material for supercapacitors [Volume 11, Number 4] |
 |
ghobadi, Nader
Synthesis of Mn2V2O7 hollow microsphere as a high performance electrode material for supercapacitors [Volume 11, Number 4] |
 |
AmirZade, Majid
Synthesis of Mn2V2O7 hollow microsphere as a high performance electrode material for supercapacitors [Volume 11, Number 4] |
 |
Mohammadzadeh, Aliakbar
The effect of tantalum carbide addition on densification of HfC-based composite [Volume 12, Number 1] |
 |
Ehsani, Naser
The effect of tantalum carbide addition on densification of HfC-based composite [Volume 12, Number 1] |
 |
Shahbahrami, Behrouz
The effect of tantalum carbide addition on densification of HfC-based composite [Volume 12, Number 1] |
 |
Moghaddasfar, Amin
Synthesis and characterization of mesoporous cobalt oxide nanoparticles in deep eutectic solvent by Sonochemical synthesis method [Volume 12, Number 1] |
 |
Darbandi, Masih
Synthesis and characterization of mesoporous cobalt oxide nanoparticles in deep eutectic solvent by Sonochemical synthesis method [Volume 12, Number 1] |
 |
Mazinani, Babak
Synthesis and characterization of mesoporous α-MnO2 nanoparticles using SBA-15 hard template and P123 soft template and their pseudocapacitive performance [Volume 12, Number 1] |
 |
Farahani, Mohsen
Synthesis and characterization of mesoporous α-MnO2 nanoparticles using SBA-15 hard template and P123 soft template and their pseudocapacitive performance [Volume 12, Number 1] |
 |
Kazazi, Mahdi
Synthesis and characterization of mesoporous α-MnO2 nanoparticles using SBA-15 hard template and P123 soft template and their pseudocapacitive performance [Volume 12, Number 1] |
 |
Ebrahimi, Naser
Ab-initio Calculation of Structural and Electronic Properties of Topological Insulator SnBi2Te4 [Volume 12, Number 1] |
 |
salehi, Hamdollah
Ab-initio Calculation of Structural and Electronic Properties of Topological Insulator SnBi2Te4 [Volume 12, Number 1] |
 |
Mousavi Khoie, S.Mohammad
Simultaneous synthesis and deposition of nitrogen doped graphene nanocoating by cathodic electrolytic plasma [Volume 11, Number 4] |
 |
Habibi, Asiyeh
Simultaneous synthesis and deposition of nitrogen doped graphene nanocoating by cathodic electrolytic plasma [Volume 11, Number 4] |
 |
gholampoor, madi
Investigating the effect of Nickel oxide on the microstructure and mechanical properties of zirconia Nanocomposite stabilized by Yttria and prepared by spark plasma sintering [Volume 11, Number 4] |
 |
Amirkhani, Rasool
Investigating the effect of Nickel oxide on the microstructure and mechanical properties of zirconia Nanocomposite stabilized by Yttria and prepared by spark plasma sintering [Volume 11, Number 4] |
 |
mohammadzadeh, Hamid
Investigating the effect of Nickel oxide on the microstructure and mechanical properties of zirconia Nanocomposite stabilized by Yttria and prepared by spark plasma sintering [Volume 11, Number 4] |
 |
Tavakoli, Hasan
Investigating the effect of Nickel oxide on the microstructure and mechanical properties of zirconia Nanocomposite stabilized by Yttria and prepared by spark plasma sintering [Volume 11, Number 4] |
 |
Mersagh Dezfuli, Saeid
The role of ion beam energy on nature of thin film of amorphous carbon (Sp2/Sp3) by ion beam deposition [Volume 11, Number 4] |
 |
Ebrahimi Fordoei, MohammadReza
The role of ion beam energy on nature of thin film of amorphous carbon (Sp2/Sp3) by ion beam deposition [Volume 11, Number 4] |
 |
Zangeneh Madar, karim
The role of ion beam energy on nature of thin film of amorphous carbon (Sp2/Sp3) by ion beam deposition [Volume 11, Number 4] |
 |
Hosseini, Seyed Hojatollah
The role of ion beam energy on nature of thin film of amorphous carbon (Sp2/Sp3) by ion beam deposition [Volume 11, Number 4] |
 |
Rouholahi, Soheila
The role of ion beam energy on nature of thin film of amorphous carbon (Sp2/Sp3) by ion beam deposition [Volume 11, Number 4] |
 |
Moghanian, Amir Hossein
Investigation of electrochemical properties of cobalt phospho selenide nanostructured electrode in hydrogen evolution reaction. [Volume 11, Number 4] |
 |
Talafi Noghani, mohammad
Investigation of electrochemical properties of cobalt phospho selenide nanostructured electrode in hydrogen evolution reaction. [Volume 11, Number 4] |
 |
Saghafi Yazdi, morteza
Investigation of electrochemical properties of cobalt phospho selenide nanostructured electrode in hydrogen evolution reaction. [Volume 11, Number 4] |
 |
miran, nafiseh alsadat
Investigation of electrochemical properties of cobalt phospho selenide nanostructured electrode in hydrogen evolution reaction. [Volume 11, Number 4] |
 |
Yaghmaei, Soheila
Investigation of the effect of calcination temperature on the properties of titanium dioxide nanoparticles and kinetic evaluation of the adsorption process of zinc (II) ions from aqueous solution by them [Volume 11, Number 4] |
 |
Heydarinasab, Amir
Investigation of the effect of calcination temperature on the properties of titanium dioxide nanoparticles and kinetic evaluation of the adsorption process of zinc (II) ions from aqueous solution by them [Volume 11, Number 4] |
 |
Bagheri Lotfabad, Tayebe
Investigation of the effect of calcination temperature on the properties of titanium dioxide nanoparticles and kinetic evaluation of the adsorption process of zinc (II) ions from aqueous solution by them [Volume 11, Number 4] |
 |
Rezaei, Nasim
Investigation of the effect of calcination temperature on the properties of titanium dioxide nanoparticles and kinetic evaluation of the adsorption process of zinc (II) ions from aqueous solution by them [Volume 11, Number 4] |
 |
Abdollahi Haghi, Himan
Investigation of the effect of calcination temperature on the properties of titanium dioxide nanoparticles and kinetic evaluation of the adsorption process of zinc (II) ions from aqueous solution by them [Volume 11, Number 4] |
 |
nazarizadeh, farhad
Theoretical foundations morphology new technology of smart materials with magnetic shape memory alloys and their application in various industries [Volume 11, Number 4] |
 |
habibi, hossein
Theoretical foundations morphology new technology of smart materials with magnetic shape memory alloys and their application in various industries [Volume 11, Number 4] |
 |
Rahimipour, Mohammad Reza
Production of YSZ powder using the co-precipitation method for thermal spraying [Volume 12, Number 1] |
 |
Ahmadi Daryakani, Ahmad
Production of YSZ powder using the co-precipitation method for thermal spraying [Volume 12, Number 1] |
 |
Ghasemi, Reza
Production of YSZ powder using the co-precipitation method for thermal spraying [Volume 12, Number 1] |
 |
Ahmadi Daryakani, Mohammad
Production of YSZ powder using the co-precipitation method for thermal spraying [Volume 12, Number 1] |
 |
Farhang Rad, Farhad
Investigating the influence of ZrB2-ZrC-SiC powders amount on density and resistance to ablation of C/C-ZrB2-ZrC-SiC composite built of carbon fabric and felt developed by the method of pressureless sintering [Volume 12, Number 1] |
 |
Mashhadi, Mehri
Investigating the influence of ZrB2-ZrC-SiC powders amount on density and resistance to ablation of C/C-ZrB2-ZrC-SiC composite built of carbon fabric and felt developed by the method of pressureless sintering [Volume 12, Number 1] |
 |
Heidarpour, Akbar
Synthesis of calcium carbide-derived carbon by mechanochemical reaction of calcium carbide with sulfur, iron sulfide and zinc oxide [Volume 11, Number 1] |
 |
Ghasemi, Samad
Synthesis of calcium carbide-derived carbon by mechanochemical reaction of calcium carbide with sulfur, iron sulfide and zinc oxide [Volume 11, Number 1] |
 |
Rasouli Samar, Mahsa
Synthesis of calcium carbide-derived carbon by mechanochemical reaction of calcium carbide with sulfur, iron sulfide and zinc oxide [Volume 11, Number 1] |
 |
Hadavi, Seyyed Mohammad Mehdi
Study the effect of nano Al2O3 and nano graphene ceramic additives on the aircraft anti-icing/de-icing fluids [Volume 11, Number 1] |
 |
nayebpashaee, nasim
Study the effect of nano Al2O3 and nano graphene ceramic additives on the aircraft anti-icing/de-icing fluids [Volume 11, Number 1] |
 |
Arabi, Amirmasoud
Comparison of different methods for the synthesis of ZnO based nanocomposites and investigation of photocatalytic degradation of Direct Red 23 [Volume 11, Number 1] |
 |
Ghahari, Mehdi
Comparison of different methods for the synthesis of ZnO based nanocomposites and investigation of photocatalytic degradation of Direct Red 23 [Volume 11, Number 1] |
 |
Mahmoodi, Niaz Mohammad
Comparison of different methods for the synthesis of ZnO based nanocomposites and investigation of photocatalytic degradation of Direct Red 23 [Volume 11, Number 1] |
 |
Yousefi Limaee, Nargess
Comparison of different methods for the synthesis of ZnO based nanocomposites and investigation of photocatalytic degradation of Direct Red 23 [Volume 11, Number 1] |
 |
Bakhshi, Mohamad hosein
Fabrication and inspection of C/Cf-ZrB2-ZrC-SiC and C/Cf-ZrB2-SiC composite parts resistant to ablation by pressureless sintering method [Volume 11, Number 1] |
 |
mashhadi, mehri
Fabrication and inspection of C/Cf-ZrB2-ZrC-SiC and C/Cf-ZrB2-SiC composite parts resistant to ablation by pressureless sintering method [Volume 11, Number 1] |
 |
shoghi, kambiz
Investigation of effective parameters on fabrication of alumina parts by low pressure injection molding (LPIM) method [Volume 11, Number 1] |
 |
ghafoori, danial
Investigation of effective parameters on fabrication of alumina parts by low pressure injection molding (LPIM) method [Volume 11, Number 1] |
 |
Amiri, Peyman
Ab initio study of the Surface Passivation influence on electronic and optical Properties of (001) SbNSr3 anti-perovskite Surface [Volume 11, Number 1] |
 |
Mousavinezhad,, N
Ab initio study of the Surface Passivation influence on electronic and optical Properties of (001) SbNSr3 anti-perovskite Surface [Volume 11, Number 1] |
 |
salehi, Hamdollah
Ab initio study of the Surface Passivation influence on electronic and optical Properties of (001) SbNSr3 anti-perovskite Surface [Volume 11, Number 1] |
 |
Sharifinia, Akbar
Study of Chemical Structure of Glass Samples belong to Sirvan Historical Site, Ilam Province [Volume 11, Number 1] |
 |
Noghani, Somayeh
Study of Chemical Structure of Glass Samples belong to Sirvan Historical Site, Ilam Province [Volume 11, Number 1] |
 |
Khanzadi, Mohammad Javad
Study of Chemical Structure of Glass Samples belong to Sirvan Historical Site, Ilam Province [Volume 11, Number 1] |
 |
ebrahiminezhad, zhaleh
The Effects Of Interfacial Roughness On The Argon Ion Implanted Tantalum Films [Volume 11, Number 2] |
 |
asgary, somayeh
The Effects Of Interfacial Roughness On The Argon Ion Implanted Tantalum Films [Volume 11, Number 2] |
 |
ramezani, amir hoshang
The Effects Of Interfacial Roughness On The Argon Ion Implanted Tantalum Films [Volume 11, Number 2] |
 |
Ramezani, Amir Hoshang
Correlation between crystal structure and optical properties of copper- doped ZnO thin films [Volume 11, Number 2] |
 |
Dejam, Laya
Correlation between crystal structure and optical properties of copper- doped ZnO thin films [Volume 11, Number 2] |
 |
mersagh dezfuli, saeid
Effect of bias voltage on structural and mechanical characteristics of diamond-like carbon thin film applied by ion beam deposition [Volume 11, Number 2] |
 |
Ebrahimi Fordoei, Mohammadreza
Effect of bias voltage on structural and mechanical characteristics of diamond-like carbon thin film applied by ion beam deposition [Volume 11, Number 2] |
 |
hosseini, seyed hojjatollah
Effect of bias voltage on structural and mechanical characteristics of diamond-like carbon thin film applied by ion beam deposition [Volume 11, Number 2] |
 |
sarvari, masoud
Effect of bias voltage on structural and mechanical characteristics of diamond-like carbon thin film applied by ion beam deposition [Volume 11, Number 2] |
 |
keyvani, ahmad
Preparation of porous porous bodies by gelcasting method and the analysis of its properties using the response surface method to remove methylene blue from aqueous solution [Volume 11, Number 2] |
 |
ghaffari, amir
Preparation of porous porous bodies by gelcasting method and the analysis of its properties using the response surface method to remove methylene blue from aqueous solution [Volume 11, Number 2] |
 |
sarpoolakyi, Hossein
Preparation of porous porous bodies by gelcasting method and the analysis of its properties using the response surface method to remove methylene blue from aqueous solution [Volume 11, Number 2] |
 |
Karimi, Niloofar
Preparation of porous porous bodies by gelcasting method and the analysis of its properties using the response surface method to remove methylene blue from aqueous solution [Volume 11, Number 2] |
 |
Amrollahi, R.
photocatalytic performance of zinc oxide particles prepared by solution combustion route [Volume 11, Number 2] |
 |
Alamolhoda, S.
photocatalytic performance of zinc oxide particles prepared by solution combustion route [Volume 11, Number 2] |
 |
Masoudpanah, S. M.
photocatalytic performance of zinc oxide particles prepared by solution combustion route [Volume 11, Number 2] |
 |
Poorali, Shiva
photocatalytic performance of zinc oxide particles prepared by solution combustion route [Volume 11, Number 2] |
 |
Fattha-alhosseini, Arash
Effect of KOH concentration on the microstructure and electrochemical behavior of ceramic coatings formed by plasma electrolytic oxidation method on AZ31B Mg alloy [Volume 11, Number 2] |
 |
Sabaghi Joni, Mahshid
Effect of KOH concentration on the microstructure and electrochemical behavior of ceramic coatings formed by plasma electrolytic oxidation method on AZ31B Mg alloy [Volume 11, Number 2] |
 |
Javdani, Zohre
Calculation of structural ,electronical and optical properties TiO2 in anatase phase [Volume 11, Number 2] |
 |
salehi, Hamdollah
Calculation of structural ,electronical and optical properties TiO2 in anatase phase [Volume 11, Number 2] |
 |
Banna Motejadded Emrooz, Hosein
Sonochemisry-assisted synthesis of mesoporous ZnS particles in non-solvent medium [Volume 11, Number 3] |
 |
Karimi, Hamid
Sonochemisry-assisted synthesis of mesoporous ZnS particles in non-solvent medium [Volume 11, Number 3] |
 |
Heidari, Mohammad Amin
Sonochemisry-assisted synthesis of mesoporous ZnS particles in non-solvent medium [Volume 11, Number 3] |
 |
Mollahasanpour, Amid
Investigation of the effect of different percentages of material on the microstructure and morphology of montmorillonite nanoparticles [Volume 11, Number 3] |
 |
Fakharpour, Mahsa
Investigation of the effect of different percentages of material on the microstructure and morphology of montmorillonite nanoparticles [Volume 11, Number 3] |
 |
Mirjalili, Fatemeh
Investigation of the effect of different percentages of material on the microstructure and morphology of montmorillonite nanoparticles [Volume 11, Number 3] |
 |
Sarpoolay, Hossein
Investigation of the effect of phosphate agent type on setting time, flowability, hydration and dehydration of magnesium phosphate cement. [Volume 11, Number 3] |
 |
seyedashour, seyed mohsen
Investigation of the effect of phosphate agent type on setting time, flowability, hydration and dehydration of magnesium phosphate cement. [Volume 11, Number 3] |
 |
Vahidshad, Yaser
Synthesis and application of mesoporous gamma alumina granules as iridium catalyst support [Volume 11, Number 3] |
 |
Rezaie, Hamid Reza
Synthesis and application of mesoporous gamma alumina granules as iridium catalyst support [Volume 11, Number 3] |
 |
Mirkazemi, Seyed Mohammad
Synthesis and application of mesoporous gamma alumina granules as iridium catalyst support [Volume 11, Number 3] |
 |
Shabani, Shaghayegh
Synthesis and application of mesoporous gamma alumina granules as iridium catalyst support [Volume 11, Number 3] |
 |
naderi, hamed
Synthesis of WC-8Co cermet powder in WO3-Co3O4-C system by in situ carbothermic solid reduction method under hydrogen atmosphere: (phase, microstructural and thermodynamic analysis) [Volume 11, Number 3] |
 |
abas zade, hasan
Synthesis of WC-8Co cermet powder in WO3-Co3O4-C system by in situ carbothermic solid reduction method under hydrogen atmosphere: (phase, microstructural and thermodynamic analysis) [Volume 11, Number 3] |
 |
shoja razavi, seyed reza
Synthesis of WC-8Co cermet powder in WO3-Co3O4-C system by in situ carbothermic solid reduction method under hydrogen atmosphere: (phase, microstructural and thermodynamic analysis) [Volume 11, Number 3] |
 |
amiri moghaddam, afshin
Synthesis of WC-8Co cermet powder in WO3-Co3O4-C system by in situ carbothermic solid reduction method under hydrogen atmosphere: (phase, microstructural and thermodynamic analysis) [Volume 11, Number 3] |
 |
KHANALI, OMID
review of the mechanical and thermal properties of high temperature Diboride ceramics [Volume 11, Number 3] |
 |
Asadi, Fatemeh
Investigation of optical and magnetic properties of UY2(Y=Ga,Ge) compositions [Volume 11, Number 3] |
 |
salehi, Hamdollah
Investigation of optical and magnetic properties of UY2(Y=Ga,Ge) compositions [Volume 11, Number 3] |
 |
Danafar, Hossein
Synthesis and characterization of Fe3O4/SiO2/GO nanocarrier in curcumin drug delivery [Volume 12, Number 1] |
 |
salimi, noushin
Synthesis and characterization of Fe3O4/SiO2/GO nanocarrier in curcumin drug delivery [Volume 12, Number 1] |
 |
Mohammadi-Manesh, Ebrahim
Synthesis and characterization of Fe3O4/SiO2/GO nanocarrier in curcumin drug delivery [Volume 12, Number 1] |
 |
Divandari, Mehdi
investigation on the wettability behavior of CuxO / blackTiO2 photocatalyst nanocomposite on copper foam by combining anodizing and sol-gel methods [Volume 10, Number 4] |
 |
Shabestari, Saeed
investigation on the wettability behavior of CuxO / blackTiO2 photocatalyst nanocomposite on copper foam by combining anodizing and sol-gel methods [Volume 10, Number 4] |
 |
Mohammadi, Katayoun
investigation on the wettability behavior of CuxO / blackTiO2 photocatalyst nanocomposite on copper foam by combining anodizing and sol-gel methods [Volume 10, Number 4] |
 |
Omrani, Behruz
Technical Features of Safavid White and Blue Glaze: Experimental Studies on the Samples Discovered from the Vault Related to Mosque-Madrassa of Sultan Hassan in Tabriz [Volume 10, Number 4] |
 |
Hadian Dehkordi, Manijeh
Technical Features of Safavid White and Blue Glaze: Experimental Studies on the Samples Discovered from the Vault Related to Mosque-Madrassa of Sultan Hassan in Tabriz [Volume 10, Number 4] |
 |
Kazemi, Arghavan
Effect of SiC nanoparticles addition on mechanical properties and wear resistance of cemented carbides fabricated by spark plasma sintering [Volume 10, Number 4] |
 |
Moazami-Goudarzi, Mohammad
Effect of SiC nanoparticles addition on mechanical properties and wear resistance of cemented carbides fabricated by spark plasma sintering [Volume 10, Number 4] |
 |
Ghayem Amanii, Mona
Effect of SiC nanoparticles addition on mechanical properties and wear resistance of cemented carbides fabricated by spark plasma sintering [Volume 10, Number 4] |
 |
Taghikhani, Mitra
Effect of citric acid chelating agent on morphology of ZnO particles prepared by hydrothermal method [Volume 10, Number 4] |
 |
rezaei, Hamidreza
Effect of citric acid chelating agent on morphology of ZnO particles prepared by hydrothermal method [Volume 10, Number 4] |
 |
Javadpour, Jafar
Effect of citric acid chelating agent on morphology of ZnO particles prepared by hydrothermal method [Volume 10, Number 4] |
 |
Fattah-alhosseini, Arash
Effect of coating time on the corrosion behavior of ceramic coatings containing hydroxyapatite nanoparticles by plasma electrolytic oxidation method on AZ31 Mg alloy in simulated body fluid [Volume 10, Number 4] |
 |
Chaharmahali, Razieh
Effect of coating time on the corrosion behavior of ceramic coatings containing hydroxyapatite nanoparticles by plasma electrolytic oxidation method on AZ31 Mg alloy in simulated body fluid [Volume 10, Number 4] |
 |
Ahmadi Rad, Eisa
Synthesis and properties evaluation of TiB2 nanoparticles produced by sol-gel method [Volume 10, Number 4] |
 |
Khalaj, Gholamreza
Synthesis and properties evaluation of TiB2 nanoparticles produced by sol-gel method [Volume 10, Number 4] |
 |
Najafi, Abolhassan
Synthesis and properties evaluation of TiB2 nanoparticles produced by sol-gel method [Volume 10, Number 4] |
 |
ehsani, naser
Investigation of effect of Chemical composition of the preform on nano-layered Ti3SiC2 max phase synthesis using reactive melt infiltration process (RMI) [Volume 10, Number 4] |
 |
foratirad, hamze
Investigation of effect of Chemical composition of the preform on nano-layered Ti3SiC2 max phase synthesis using reactive melt infiltration process (RMI) [Volume 10, Number 4] |
 |
baharvandi, hamidreza
Investigation of effect of Chemical composition of the preform on nano-layered Ti3SiC2 max phase synthesis using reactive melt infiltration process (RMI) [Volume 10, Number 4] |
 |
hosseinizadeh, seyyed ali
Investigation of effect of Chemical composition of the preform on nano-layered Ti3SiC2 max phase synthesis using reactive melt infiltration process (RMI) [Volume 10, Number 4] |
 |
dastjerdi, morteza
Facile Synthesis of TiC Powder Through Microwave- Assisted Self-Propagating High-Temperature Synthesis [Volume 4, Number 4] |
 |
banijamali, sara
Sinterability, Crystallization Behavior and Microwave Dielectric Properties of Mullite Microparticles-ZBS (ZnO-B2O3-SiO2) Glass Composites [Volume 4, Number 4] |
 |
ebadzadeh, touraj
Sinterability, Crystallization Behavior and Microwave Dielectric Properties of Mullite Microparticles-ZBS (ZnO-B2O3-SiO2) Glass Composites [Volume 4, Number 4] |
 |
akbarpour, marjan
Sinterability, Crystallization Behavior and Microwave Dielectric Properties of Mullite Microparticles-ZBS (ZnO-B2O3-SiO2) Glass Composites [Volume 4, Number 4] |
 |
samadi, hamed
The Influence of Mechanical Activation on Microwave Combustion Synthesis of Al2O3-B4C Composite Powder [Volume 4, Number 4] |
 |
bavand-vandchali, mohammad
The Influence of Mechanical Activation on Microwave Combustion Synthesis of Al2O3-B4C Composite Powder [Volume 4, Number 4] |
 |
nakisa, oveys
The Influence of Mechanical Activation on Microwave Combustion Synthesis of Al2O3-B4C Composite Powder [Volume 4, Number 4] |
 |
Sarraf-Mamoory, Rasoul
Determination of Optimized Conditions for Precipitation Synthesis of Calcium Hydroxide Nanoparticles Using Central Composite Design Method (CCD) [Volume 4, Number 4] |
 |
Mousavi, Golsa
Determination of Optimized Conditions for Precipitation Synthesis of Calcium Hydroxide Nanoparticles Using Central Composite Design Method (CCD) [Volume 4, Number 4] |
 |
Razm, Ehsan
Effect of Sintering Temperature and Time on The Cristalization and Microstructure of Fused Silica Ceramics Prepared by Gel Casting [Volume 5, Number 1] |
 |
Ghassai, Hossein
Effect of Sintering Temperature and Time on The Cristalization and Microstructure of Fused Silica Ceramics Prepared by Gel Casting [Volume 5, Number 1] |
 |
Sarpoolaky, Hossein
Effect of Sintering Temperature and Time on The Cristalization and Microstructure of Fused Silica Ceramics Prepared by Gel Casting [Volume 5, Number 1] |
 |
Safiari, Maryam
Effect of Sintering Temperature and Time on The Cristalization and Microstructure of Fused Silica Ceramics Prepared by Gel Casting [Volume 5, Number 1] |
 |
Gerveei, Abolfazl
Non-destructive Evaluation of Fired Bending Strength of Unglazed Ceramic tile Bodies Using Two Parametric Weibull Statistic Distribution Model [Volume 5, Number 1] |
 |
naghizadeh, rahim
Studying the synthesis, microstructure and mechanical properties of Alumina/zirconia-cobalt composites [Volume 5, Number 3] |
 |
saeedi heydari, mina
Investigation on the effect of time of milling and temperature on synthesis of nanostructure Ti3SiC2 by Mechanical alloying – heat treatment method [Volume 5, Number 3] |
 |
hassanzade tabrizi, ali
The photocatalytic activity of Ag/CNT on mesoporous TiO2 investigation by Methyl Orang degradation [Volume 5, Number 3] |
 |
nourbakhsh, amir abbas
The photocatalytic activity of Ag/CNT on mesoporous TiO2 investigation by Methyl Orang degradation [Volume 5, Number 3] |
 |
masoud, mahsa
The photocatalytic activity of Ag/CNT on mesoporous TiO2 investigation by Methyl Orang degradation [Volume 5, Number 3] |