 |
AA2024 Aluminium
Corrosion Behavior of Zirconia-Yttria-Benzotriazole Hybrid Ceramic Coating Applied on the Surface of AA2024 Aluminum Alloy by Sol-Gel Process [Volume 5, Number 2] |
 |
AA5083 aluminum alloy.
Effect of bias voltage on structural and mechanical characteristics of diamond-like carbon thin film applied by ion beam deposition [Volume 11, Number 2] |
 |
Abrasion resistance.
Preparation of thin layer of TiO2 on glazed tile substrate and changing hydrophilic to hydrophobicity behavior [Volume 9, Number 4] |
 |
Absorption bands
Fabrication and Characterization of Ge33As12Se55 Chalcogenide Glass as an Infrared Window [Volume 4, Number 4] |
 |
Ag2O2.
Synthsis of Ag2O2 Semiconductor Micropowder by Plasma Electrolysis Methode and its Optical Characterization [Volume 8, Number 4] |
 |
Alumina-based composite
Effect of particle size and mechanical activation on combustion synthesis of Alumina-based composite [Volume 3, Number 2] |
 |
Aluminothrmic reduction
Effect of temperature and type of carbon on synthesis of MgAl2O4-Ti (C, N) composite by aluminothermic reduction [Volume 1, Number 1] |
 |
And Transparency
The production of Nd:Y2O3 transparent ceramics with its optical and structural properties [Volume 7, Number 1] |
 |
Annealing.
Correlation between crystal structure and optical properties of copper- doped ZnO thin films [Volume 11, Number 2] |
 |
Antibacterial properties
Synthesis of copper oxide nanoparticles via Electro-explosion of wire method: investigation of the effect of applied electrical energy, surfactant and antibacterial properties [Volume 7, Number 1] |
 |
Antimony
Study the Effect of Chromium and Antimony Doping on Physical Properties of Yellow Ceramic Nano Pigments Based on TiO2 [Volume 6, Number 4] |
 |
Artificial Neural Network
Prediction of Biphasic Calcium Phosphate Synthesis Conditions Using Artificial Neural Network [Volume 1, Number 1] |
 |
Aspect ratio
The effect of hydrothermal processes on physical and biological properties of anionic nano clay calcium - aluminum type [Volume 1, Number 3] |
 |
Atterberg limitations
Study of ceramic characterstics of clays of Razak and Mishan Formations of Fars Province [Volume 1, Number 2] |
 |
Band gap
Ab-initio Calculation of Structural and Electronic Properties of Topological Insulator SnBi2Te4 [Volume 12, Number 1] |
 |
Bending strength.
Studying the synthesis, microstructure and mechanical properties of Alumina/zirconia-cobalt composites [Volume 5, Number 3] |
 |
BiFeO3
Investigation of structural and electrical properties of Bi0.5(Na1-xKx)0.5TiO3-yBiFeO3 ceramic system [Volume 2, Number 3] |
 |
Boron carbide
Investigation of boron carbide particles and mechanical milling time on the microstructure and mechanical properties of Al2024-B4C nanocomposite [Volume 2, Number 1] |
 |
CO2 laser
Evaluation of synthesized bioactive glass coating on stainless steel 316L by CO2 laser [Volume 1, Number 1] |
 |
CTAB
Effect of process parameters on the Synthesis of Mesoporous SnO2 spheres [Volume 3, Number 4] |
 |
CaAl4O7 Phase
Investigation of the effect of phosphate on the physical and microstructural properties of synthetic calcium aluminate cement [Volume 10, Number 3] |
 |
Carbon/Nickel Oxide composite
The investigation of electrochemical behavior of Carbon/Nickel Oxide as an Electrode in Supercapacitors [Volume 3, Number 1] |
 |
Cathodic Poisoning
Copper Manganese Spinel Coating on a Ferritic Stainless Steel for SOFC Application [Volume 9, Number 1] |
 |
CeO2.
Influence of electroplating parameters on microstructure and amount of ceramic particle deposition in Ni-Co-CeO2-ZrO2 composite coating [Volume 9, Number 2] |
 |
Cell culture
Effect of electrospin bioactive glass fibers on calcium sulfate properties [Volume 4, Number 1] |
 |
Ceramic ink
Combustion synthesis of submicron cobalt chromite black pigment containing Mn [Volume 6, Number 2] |
 |
Ceramic tile body
Non-destructive Evaluation of Fired Bending Strength of Unglazed Ceramic tile Bodies Using Two Parametric Weibull Statistic Distribution Model [Volume 5, Number 1] |
 |
Ceramic tile industry
THE STUDY OF IMPORTANT FACTORS IN BRAND CITIZENSHIP BEHAVIOR IN SALES AND MARKETING DEPARTMENT OF CERAMIC TILE INDUSTRY IN IRAN [Volume 9, Number 1] |
 |
Ceramic tile.
Study the effect of adding talc material to the engobe composition of ceramic tile on the water absorption and the physical properties [Volume 7, Number 2] |
 |
Ceramic whiskers.
The effect of nano transition metals on microstructure and phase evolution of low carbon MgO-C refractories [Volume 8, Number 3] |
 |
Ceramics Compounds
Synthesis and Characterization of Free-CaF2 Mold Powder Containing Ceramics Compounds as TiO2, B2O3, ZnO and Na2O [Volume 6, Number 2] |
 |
Colorimetry
Fabrication of a yellow ceramic nano pigment based on zirconium oxide (ZrO2) and iron oxide as dopant (Fe2O3) [Volume 9, Number 2] |
 |
Combustion method
Comparison of different methods for the synthesis of ZnO based nanocomposites and investigation of photocatalytic degradation of Direct Red 23 [Volume 11, Number 1] |
 |
Composite paints
Optimization of Electromagnetic Matching of Carbonyl iron / La0.8Sr0.2MnO3 Composites for Microwave Absorption [Volume 5, Number 1] |
 |
Composites
Chitosan-Gelatin/Biphasic calcium phosphate composite scaffold for bone tissue engineering: Optimization of mechanical properties with the statistical model [Volume 2, Number 2] |
 |
Compressive strength.
Evaluation of cytotoxicity and mechanical properties of
fluorapatite-45S5 bioactive glass nanocomposite [Volume 8, Number 4] |
 |
Contact paste
8YSZ sintering by flash sintering method and evaluation of process parameters [Volume 9, Number 2] |
 |
Copper Zinc Ferrites
synthesis of Zn-substituted copper ferrite via nanocasting method [Volume 2, Number 4] |
 |
Coprecipitation method
Synthesis of Composite Nanoparticles‚ Containing CNT- PANI- nickel Ferrite and Investigation of their Structural Properties [Volume 5, Number 2] |
 |
Corrosion properties.
Improvement of corrosion behaviour of Al2024 by applied Titania-Alumina- Benzotriazole composite nanostructured coating with sol- gel method [Volume 5, Number 3] |
 |
Corrosion resistance
Preparation ZrO2 ceramic coating by electrolytic plasma oxidation and study of the effect of monoclinic/tetragonal phases on the corrosion resistance of the coating [Volume 8, Number 1] |
 |
Corrosion.
The effect of sodium silicate concentration on the microstructure and corrosion behavior of ceramic coating formed by plasma electrolytic oxidation method on the 5052 Al alloy [Volume 6, Number 2] |
 |
Crystallization activation energy.
The study of crystallization kinetics and determination of Avrami index in TeO2-V2O5-NiO amorphous samples by calorimetric analysis [Volume 5, Number 3] |
 |
DLS technique
Studying the Effect of n-Hexane on the Formation of P123 Micelles in the Mesostructured Sol of Titania by DLS Technique [Volume 1, Number 1] |
 |
DTA
Archaeometry Studies of the Bronze Age Pottery and Ceramics of Tepe Silveh Piranshahr, NW IRAN [Volume 9, Number 2] |
 |
Data modeling
Synthesis of nano HA/βTCP mesoporous particles using a simple modification in granulation method in PVA/ Oil and investigation of biological response [Volume 8, Number 1] |
 |
Density of non-bridging oxygens.
Electrical conductivity anomaly in silver vadadium-tellurite glasses at temperatures higher than a characteristic temperature: evidence for an ionic-nonadiabatic polaronic mixed conduction [Volume 8, Number 2] |
 |
Desalination.
Synthesis of Low Cost Ceramic Membranes for Reduction of Water TDS [Volume 7, Number 3] |
 |
Dielectric constant
Structure, Microstructure, Magnetic and Electrical Properties of Nanostructured Li Ferrite Synthesized by Sol-Gel Process [Volume 6, Number 1] |
 |
Dielectric loss.
Investigation the Effect of Niobium Oxide Additive on the Dielectric Properties of Bismuth Titanate [Volume 10, Number 3] |
 |
Dielectric properties
The effect of sintering parameters on the microstructure and dielectric properties of bismuth titanate [Volume 9, Number 2] |
 |
Dielectric properties
Assessing the dielectric and ferroelectric properties of barium titanate produced from barite concentrate and comparing with barium titanate manufactured using commercial raw materials [Volume 12, Number 4] |
 |
Dielectric properties
The effect of titanium dioxide and molybdenum oxide on the properties of sodium potassium niobate piezoceramic [Volume 9, Number 1] |
 |
Differential scanning calorimetry.
Determination of the activation energy of crystallization based up on Ozawa and Kissinger formalisms and thermal stability of V2O5-NiO- TeO2 glasses by differential scanning calorimetry (DSC) [Volume 9, Number 2] |
 |
Doped ceria
Synthesis and Ionic Conduction of Ca0.05Sm0.2Ce0.75O1.9-δ - (Li,Na)2CO3 Nanocomposite as an Electrolyte for Low-Temperature Solid Oxide Fuel Cell [Volume 5, Number 1] |
 |
Drug Delivery.
Synthesis and characterization of Fe3O4/SiO2/GO nanocarrier in curcumin drug delivery [Volume 12, Number 1] |
 |
Effluent.
Synthesis of NiO/Fe3O4 Supported onto Clinoptilolite Zeolite and Evaluating its Performance in the Catalytic Ozonation of Dairy Effluents [Volume 12, Number 2] |
 |
Elastic constants.
Ab-initio Calculation of the Electronic, Optical and Elastic Properties of NiMnSb Compound [Volume 12, Number 4] |
 |
Electrochemical capacitors
Synthesis of Mn2V2O7 hollow microsphere as a high performance electrode material for supercapacitors [Volume 11, Number 4] |
 |
Electrochemical corrosion
Corrosion behavior and microstructure of micro arc ceramic coating formed on the 6061 aluminum alloy [Volume 4, Number 3] |
 |
Electrochemical properties
The effect of fuel type on the synthesis of LiMn1.5Ni0.5O4 powders by solution combustion route [Volume 9, Number 4] |
 |
Electrospinning Method.
Mesoporous Nano-bio-glass fiber Synthesis with High Surface area by Electrospinning [Volume 2, Number 3] |
 |
Elemental Analysis
Study of Chemical Structure of Glass Samples belong to Sirvan Historical Site, Ilam Province [Volume 11, Number 1] |
 |
Escherichia coli
Investigation of Bacteriation Properties of Copper-Tin Nanocrystalline Alloys Produced by Mechanical Alloys [Volume 7, Number 2] |
 |
Exfoliation
Structural and Microstructural Investigation of Graphene Synthesized by Mechanical Milling in NMP [Volume 10, Number 1] |
 |
Experimental design of CCD
Determination of Optimized Conditions for Precipitation Synthesis of Calcium Hydroxide Nanoparticles Using Central Composite Design Method (CCD) [Volume 4, Number 4] |
 |
Feedstock
Investigation of effective parameters on fabrication of alumina parts by low pressure injection molding (LPIM) method [Volume 11, Number 1] |
 |
Flow-through electrode
Fabrication of carbon nanotubeFlow-through electrodes for capacitive deionization process [Volume 4, Number 2] |
 |
Foam
Investigation of the Effect of high Alumina Cement on the Properties of Foamed Alumina Insulation Bricks [Volume 9, Number 3] |
 |
Fourier transforms infrared
Investigation of the effect of different surface active agents on the synthesis of β-TCP / HA nanocomposite powder [Volume 7, Number 3] |
 |
Friction.
Modelling powder compaction process for Zirconia powder under cold compaction. [Volume 3, Number 2] |
 |
Geraphene (G)
Investigation of G / RGO-ZnO-TiO2 nanocomposite with ZnO different morphology and its effect on Dye-Sensitized Solar Cell efficiency [Volume 6, Number 4] |
 |
Grain boundary.
Comparison of the effect of chromium oxide and magnesium oxide on the mechanical properties and microstructure of alumina-mullite-zirconia composites [Volume 9, Number 3] |
 |
Graphene nanoplate
Study the effect of nano Al2O3 and nano graphene ceramic additives on the aircraft anti-icing/de-icing fluids [Volume 11, Number 1] |
 |
Graphene.
Fabrication of cu based metal-organic framework / graphene Nanocomposite and study electrochemical performance in supercapacitors [Volume 8, Number 1] |
 |
Hard water softening
synthesies of zeolite LTA and adsorbtion Ca ion from the water [Volume 3, Number 4] |
 |
HfB2
review of the mechanical and thermal properties of high temperature Diboride ceramics [Volume 11, Number 3] |
 |
High strain rate
On the Use of SHPB Techniques to Determine the Dynamic Behavior of Ceramics [Volume 1, Number 3] |
 |
High- vacuum magnetron sputtering.
EIS study of Ti/TiN nanostructured coating applied on Al 7075 by high-vacuum magnetron sputtering [Volume 5, Number 4] |
 |
Hydration
Investigation of the effect of phosphate agent type on setting time, flowability, hydration and dehydration of magnesium phosphate cement. [Volume 11, Number 3] |
 |
Hydrothermal
Fabrication and investigation of photodegradation properties of perovskite strontium titanate nanocomposites doped with manganese used to remove acid red and acid black dyes under sunlight [Volume 12, Number 0] |
 |
Hydrothermal synthesis
Study on the effect of utilizing molybdenum disulfide as an electrocatalyst in cathode on the specific capacitance of lithium-oxygen battery [Volume 12, Number 2] |
 |
Hydroxyapatite
Study of the Effect of Palladium (Pd) and Hydroxy Optidium (Hap) on the Structural and Photocatalytic Properties of Bismuth Tungstate Nanoparticles (Bi2WO6) [Volume 8, Number 4] |
 |
Hydroxyapatite nanoparticles-Mesoporous-surfactant-drug delivery- controlling the size of pores.
The effect of surfactant removal method on the pore characteristics in the synthesis of nanosizemesoporous hydroxyapatite particles [Volume 2, Number 4] |
 |
Hydroxyapatite-Alumina/Zirconia Nanocomposites.
Effect of Temperature on Mechanical and Microstructural Properties of Hydroxyapatite-Alumina/Zirconia Nanocomposites [Volume 1, Number 2] |
 |
ICR
Investigation of the electrical properties and corrosion resistance of TiN coating deposited by reactive sputtering on the titanium bipolar plate, used in polymeric fuel cell [Volume 7, Number 4] |
 |
Idle time
The effect of solid content on rheological behaviour and time of gelation in Si gel-casting [Volume 4, Number 2] |
 |
In-site Synthesis
Fabrication of Ti3SiC2-SiC max phase composites via in-situ and ex-situ synthesis [Volume 8, Number 3] |
 |
Ion Beam Deposition
Investigation of the structure and properties of diamond-like carbon thin film formed on AISI 4140 steel by ion beam deposition [Volume 12, Number 0] |
 |
Ion Beam Deposition.
Increasing of corrosion resistance of 316 L steel by amorphous carbon thin film for use in medical implants [Volume 12, Number 3] |
 |
Ionic Conductivity
Improvement of ionic conductivity of gadolinium doped ceria electrolyte with nano CuO sintering aid [Volume 9, Number 4] |
 |
Joining Strength.
Ceramic-metal joining in electron gun shell for Traveling-wave tubes [Volume 7, Number 1] |
 |
Layered ceramics
Investigation of the effect of milling time and press pressure on Ti3SiC2 nanolayer maxphase synthesis using reactive melt infiltration process [Volume 7, Number 3] |
 |
Leaching
Feasibility of the Isfahan feldspars upgrading for applications in the tile and ceramic industries [Volume 6, Number 3] |
 |
Lead borosilicate
An investigation of the effect of temperature on viscosity and electrical conductivity of a copper enamel [Volume 3, Number 1] |
 |
Li2O-TiO2-P2O5 Glass Ceramic
Crystallization behavior of glass-ceramic system45Li2O-xTiO2-(55-x)P2O5 [Volume 2, Number 3] |
 |
LiNO3 electrolyte.
Voltage increase of aqueous lithium-ion batteries by Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic [Volume 7, Number 4] |
 |
Liquid phase sintering
Finite Element Simulation of Pyroplastic Deformation for Ceramic Bodies During Liquid Phase Sintering Process [Volume 6, Number 1] |
 |
MAGNETIC NANOPARTICLES
Preparation iron oxide nanoparticles by coprecipitation method and envestigation the effect of concentraion ratio of reactant on physical and magnetic properties of nanoparticles [Volume 2, Number 1] |
 |
MCM-48
Investigation and comparison of nano silicon carbide synthesized via low temperature magnesiothermal method using CNT pre-structures and functionalized CNTs [Volume 6, Number 3] |
 |
MSR
Synthesis of Ti3SiC2 MAX Phases by High Energy Ball Milling of Elemental Powders of Ti, Si and graphite C [Volume 4, Number 3] |
 |
MWCNT
Effect of different carbon supports on the electrochemical behavior of Low Temperature Polymeric Fuel Cells (PEMFCs) [Volume 1, Number 1] |
 |
Magnesium chloride.
Investigation of the formation mechanisms of Fe(Mg)O.Al2O3 spinel solid solution synthesized through co-precipitation method [Volume 3, Number 1] |
 |
Magnetic hyperthermia.
Synthesis and characterization of PEGylated calcium ferrite magnetic particles for hyperthermia applications [Volume 6, Number 4] |
 |
Magnetic properties
Investigation of Formation Mechanism, Magnetic Properties and Micro Structure of Calcium Hexaferrite [Volume 2, Number 4] |
 |
Magnetron Sputtering.
Applying and Characterization of Physical – Chemical Properties of HA and TiO2 Coatings on Ti-6Al-4V Alloy [Volume 6, Number 1] |
 |
Mechanical Alloying
Study of the Mechanical Milling Process of AZ91D Magnesium Alloy Chips and Mechanical Alloying of Obtained Powder with Silicon Carbide Particles [Volume 7, Number 1] |
 |
Mechanical Properties.
Study of Synthesis of (TiW)CN-Ni High Strength Cermets and the effects of Secondary Carbides on Microstructure and Mechanical Properties [Volume 6, Number 4] |
 |
Mechanical behavior.
Investigation of mechanical behaviors of zirconia-alumina nanocomposite coating applied on Al 2024 by sol- gel method [Volume 6, Number 2] |
 |
Mechanochemical Reaction
Synthesis of calcium carbide-derived carbon by mechanochemical reaction of calcium carbide with sulfur, iron sulfide and zinc oxide [Volume 11, Number 1] |
 |
Melting Method
Research on Magnetic properties of SiO2 - Fe2O3 - Na2O - B2O3 nano glass ceramics with Cr2O3 as nucleating agent [Volume 10, Number 1] |
 |
Mesoporous
Sonochemisry-assisted synthesis of mesoporous ZnS particles in non-solvent medium [Volume 11, Number 3] |
 |
MgO
Investigation the effect of MgO and Temperature on Phase separation and porosity of Borosilicate Glasses for use in Glass Membranes [Volume 1, Number 2] |
 |
MgO
Preparation of Translucent Ceramic from Al2O3 nanopowder by pressureless sintering method [Volume 2, Number 1] |
 |
Microstructural and structural properties
Effect of nano silica on properties of metakaolin-based geopolymers [Volume 6, Number 1] |
 |
Microstructure
Study of effective factors on microstructure and properties of gel cost NiO/SDC composite as an anodes application in solid oxide fuel cell [Volume 3, Number 1] |
 |
Microstructure
Investigation the Effect of Sodium Nitrate on the Properties of Gypsum Bodies [Volume 7, Number 3] |
 |
Microstructure
The Role of Oxides (ZrO2, Cr2O3, Nb2O5) on the Physical Properties of Alumina Ceramics [Volume 5, Number 2] |
 |
Microstructure Study
Investigation of composite powder synthesis (Al2O3-WXSiY-WXBY) in aluminothermic combustion system (Al+B2O3+Si+WO3) using thermal analysis [Volume 8, Number 2] |
 |
Microwave
Increasing of tetragonal zirconia formation in the reaction sintering of alumina-zircon [Volume 8, Number 1] |
 |
Microwave absorption
Synthesis and characterization of triple layer nanostructure for microwave absorption in the Ku frequency range [Volume 6, Number 3] |
 |
Microwave absorption
Microstructural, Magnetic and microwave absorption characteristics of barium hexaferrite substituted with Co-Cr-Sn via mechanochemical method [Volume 4, Number 2] |
 |
Microwave heating
Silicon Carbide Synthesis by Microwave-Assisted SHS Reaction in a SiO2-Mg-C System [Volume 2, Number 3] |
 |
Monte Carlo simulation Geant4
Gamma ray protective properties of some oxide ceramics using Geant4 Monte Carlo simulator [Volume 12, Number 0] |
 |
Morphology
Effect of citric acid chelating agent on morphology of ZnO particles prepared by hydrothermal method [Volume 10, Number 4] |
 |
Morphology
Evaluation of the performance of the Acanthophyllum laxiusculum concentrate for the synthesis of silica nanoparticles by using the sol-gel method [Volume 4, Number 3] |
 |
Morphology.
Effect of chelating agent on Hydroxyapatite morphology under hydrothermal process [Volume 8, Number 3] |
 |
Mott-Schottky analysis
Effect of KOH concentration on the microstructure and electrochemical behavior of ceramic coatings formed by plasma electrolytic oxidation method on AZ31B Mg alloy [Volume 11, Number 2] |
 |
Nano silica.
Effect of Nano and Micro Silica on the pyroplastic deformation of Domestic porcelain tile [Volume 9, Number 3] |
 |
Nano-indentation method
Production, characterization, microstructure study and comparison of thermal shock behavior of two-layer and functionally graded thermal barrier coatings [Volume 6, Number 3] |
 |
Nano-mechanical properties.
Enhanced of Nano-mechanical Properties of NiTi Alloy by Applied Nanostructured Tantalum Nitride Coating with Magnetron Sputtering method [Volume 8, Number 4] |
 |
Nano-structured Ceramics.
Cold Sintering Process: New sintering technique for fabrication of nano-structured ceramics below 300 °C - A review [Volume 9, Number 1] |
 |
Nanoparticles
Synthesis and properties evaluation of TiB2 nanoparticles produced by sol-gel method [Volume 10, Number 4] |
 |
Nanoporous
Fabrication and Characterization of Nano-porous beta-Sialon Ceramic Articles Prepared via Gel-casting [Volume 3, Number 3] |
 |
Natural Clinoptilolite zeolite
Investigation of Low-Temperture Synthesis of Boron Carbide Nanostructure by Using CMK-3 and Porous Carbon Obtained by Natural Clinoptilolite Zeolite in Magnesiothermic Reduction Process [Volume 2, Number 4] |
 |
Nitrogen adsorption-desorption
The effect of solvent type on the synthesis of mesoporous alumina using triblock copolymer P123 [Volume 2, Number 1] |
 |
Nitrogen doping
Simultaneous synthesis and deposition of nitrogen doped graphene nanocoating by cathodic electrolytic plasma [Volume 11, Number 4] |
 |
Nuclear Application and Bullet Coating
Properties, Application and Synthesis Methods of boron nitride Powder: A Review [Volume 8, Number 2] |
 |
Optical Applications.
Preparation and luminescence properties of Y-doped transparent glass-ceramics containing of lithium-mica nanocrystals [Volume 1, Number 2] |
 |
Optical Properties.
Synthesis of TiO2-CuO mesoporous composite nanoparticles by sol-gel method and evaluation of structural, optical and photocatalytic properties [Volume 10, Number 1] |
 |
Optical properties
Ab initio study of the Surface Passivation influence on electronic and optical Properties of (001) SbNSr3 anti-perovskite Surface [Volume 11, Number 1] |
 |
Organic - mineral hybrids.
Investigation of the Effect of DMOAP with Dimethyl Octadecyl Aminopropyl Group on TMOS Wettability Properties [Volume 7, Number 4] |
 |
Osteoblast Cell
Fabrication and Investigation on Biocompatibility Behavior of HA/UHMWPE Nanocomposite for Biomedical Engineering Application [Volume 3, Number 4] |
 |
P123.
Synthesis and characterization of mesoporous α-MnO2 nanoparticles using SBA-15 hard template and P123 soft template and their pseudocapacitive performance [Volume 12, Number 1] |
 |
PLS
Effect of Short Carbon Fiber (Csf) Addition on Oxidation Resistance, toughness and hardness behavior of Pressureless [Volume 12, Number 3] |
 |
PVDF.
Tape casting and properties of PZT-PVDF composites [Volume 3, Number 1] |
 |
Particle concentration
Effect of TiO2 Particle Concentration on Microstructure and Mechanical Properties of Ni-P-TiO2 Composite Coatings [Volume 9, Number 3] |
 |
Phase anatase
Calculation of structural ,electronical and optical properties TiO2 in anatase phase [Volume 11, Number 2] |
 |
Phosphor Materials
Study of Optical Properties of Yttrium Oxide Based Nano Ceramics [Volume 6, Number 2] |
 |
Photocatalyst
Fabrication and study of color and physical properties for cobalt silicate-titanite ceramic pigment by sol-gel method [Volume 8, Number 1] |
 |
Photocatalyst.
Synthesis, characterization and investigation of optical and photocatalytic properties of zinc oxide nanoparticles in three different rod, spherical and sheet morphologies [Volume 10, Number 1] |
 |
Photocatalytic Activity
Investigation of photocatalytic behavior of nano TiO2 coated on high purity aluminum substrate [Volume 2, Number 3] |
 |
Photocatalytic Performance
photocatalytic performance of zinc oxide particles prepared by solution combustion route [Volume 11, Number 2] |
 |
Photocatalytic properties.
Effect of Thickness and Multilayer Characteristic on the Photocatalytic Properties of the Multilayer Nano-Structured Titania Coatings on 304L Stainless Steel [Volume 1, Number 3] |
 |
Photoluminescence
Synthesis and Study of Annealing Temperature on Photoluminescence Properties of Nanoporous Anodic Aluminium Oxide - Sm3+ Nanocomposite Layer [Volume 5, Number 2] |
 |
Physical properties
Investigation of crystalline and optical properties of TiO2 nanoparticles with cerium atoms prepared by sol-gel chemical method [Volume 7, Number 3] |
 |
Polarization.
Effect of current density on the microstructure and polarization resistance of Ni-P-TiO2-ZrO2 composite coating [Volume 8, Number 2] |
 |
Polarization.
The effect of pH on the morphology and polarization resistance of
Ni-P-TiO2-ZrO2 composite coating [Volume 8, Number 3] |
 |
Porcelain.
Technical Features of Safavid White and Blue Glaze: Experimental Studies on the Samples Discovered from the Vault Related to Mosque-Madrassa of Sultan Hassan in Tabriz [Volume 10, Number 4] |
 |
Potentiodynamic Polarization.
Effect of nano-Al2O3 particles concentration on microstructure and corrosion behavior of Co-P-nano-Al2O3 composite coating [Volume 9, Number 4] |
 |
Powder’s optimization
Investigation of the effective factors on manufacturing calcium phosphates prototypes using 3D printing [Volume 9, Number 1] |
 |
Print
Synthesis and Study of the Physical and Optical Properties of the Composite Pigments of Cr2O3-SiO2 and Cr2O3-TiO2 by Using Ceramic Method [Volume 9, Number 4] |
 |
Print
Study the Color properties of CoAl2O4 as a Blue Ceramic Nano Pigment fabricated by Co-precipitation and Printed on Ceramic [Volume 8, Number 4] |
 |
Proton exchange membrane fuel cells
Using thermoelectric materials for waste heat recovery in proton exchange membrane fuel cells [Volume 12, Number 3] |
 |
Pulse electrodepositing process
Coating of bone-like Hydroxyapatite on biodegradable Mg-Zn scaffold by pulse electro deposition process [Volume 4, Number 2] |
 |
Raman Spectroscopy
Characterization of diamond-like carbon coating (DLC) deposited by low voltage electrolytic deposition method with Raman spectroscopy [Volume 12, Number 0] |
 |
Regeneration
Effect of composition on sinterability, crystallization and mechanical properties of degradable glass-ceramics in the system [Volume 1, Number 2] |
 |
Response Surface Methodology
Study Kinetic and Isotherm adsorption of Reactive Blue 39 onto nano Zinc hydroxide chloride [Volume 9, Number 4] |
 |
Response surface methodology
Preparation of porous porous bodies by gelcasting method and the analysis of its properties using the response surface method to remove methylene blue from aqueous solution [Volume 11, Number 2] |
 |
SHS
The Effect of Mechanical Activation on Microstructure of TiB2-TiC- 15wt% Ni Cermet Synthesized by SHS [Volume 5, Number 2] |
 |
STA
Investigation on Mechanism of Cordierite Formation from Nano Silica-Magnesium chloride-Reactive Alumina [Volume 8, Number 1] |
 |
Scaffolds.
Effect of dicalcium phosphate dihydrate bioceramic nanoparticles on the electrospun poly) ε-caprolacton (nanofibers for bone tissue engineering [Volume 7, Number 3] |
 |
Scraps
The Effect of bone china scraps addition on sintering behavior of hard porcelain body [Volume 5, Number 4] |
 |
SiC-TiC nanocomposite
SiC-TiC nano composite powder prepared by sol-gel method and Carbothermal reduction [Volume 6, Number 4] |
 |
Sinterability
Fabrication of Medium Entropy (Zr1-2xHfxTix)B2 composite and charectrization of its properties [Volume 12, Number 4] |
 |
Soda-lime glass
Analytical Studies and Identification of Production Process in the Glass Objects from the Underground Hand-Made Architectural Complex of Arzanfood, Hamedan [Volume 9, Number 2] |
 |
Sol gel-oil drop
Synthesis and application of mesoporous gamma alumina granules as iridium catalyst support [Volume 11, Number 3] |
 |
Sol-gel
Preparation of self-cleaning, anti-reflective titania-silica nanostructure coating by sol-gel metho [Volume 12, Number 0] |
 |
Solid solution.
The effect of tantalum carbide addition on densification of HfC-based composite [Volume 12, Number 1] |
 |
Sonophotocatalys
Synthesis and characterization of mesoporous cobalt oxide nanoparticles in deep eutectic solvent by Sonochemical synthesis method [Volume 12, Number 1] |
 |
Sonophotocatalyst.
Effect of deep eutectic solvent on the synthesis of nickel oxide nanoparticles [Volume 12, Number 2] |
 |
Southeastern Iran
Ancient Pottery and Archaeometry; Investigations on the technology of pottery manufacturing process from Aliabad culture in Dehno, Shahdad periphery, Southeast of Iran (3750-3250 BC) [Volume 9, Number 3] |
 |
Sp3 Bond
The role of ion beam energy on nature of thin film of amorphous carbon (Sp2/Sp3) by ion beam deposition [Volume 11, Number 4] |
 |
Spark Plasma Sintering
Fabrication the ZrB2-HfB2-TiB2 medium entropy and investigation of hardness and fracture toughness [Volume 12, Number 3] |
 |
Spark Plasma Sintering (SPS)
Study of spark plasma sintering of SiC-B4C nanocomposite synthesized by mechanically activated self-propagating high-temperature synthesis (MASHS) [Volume 3, Number 3] |
 |
Spark Plasma Sintering.
Grain growth kinetic of spark plasma sintered magnesia [Volume 8, Number 4] |
 |
Spark plasma instrument
Investigation of the effect of sample volume on the synthesis of B4C / SiC nanocomposite powder by mechanical activation volume combustion synthesis method assisted by spark plasma instrument [Volume 9, Number 1] |
 |
Specific loss power
Magnetic and heating rate properties of Mn1-xCoxFe2O4 nanoparticles synthesized by coprecipitation method [Volume 6, Number 3] |
 |
Spin-Polarized
Investigation of Optical Property of Tetragonal BiFeO3 [Volume 10, Number 3] |
 |
Strain
Electrical properties of the (1-x)BNT-xBKT system near morphotropic phase boundary [Volume 2, Number 1] |
 |
Strength.
Investigation of the Properties of Sodium Beta-Alumina Electrolyte in the Presence of Yttria Stabilized Zirconia and Niobium Oxide as Additives [Volume 7, Number 1] |
 |
Surface modifier.
Investigation of the effect of different percentages of material on the microstructure and morphology of montmorillonite nanoparticles [Volume 11, Number 3] |
 |
Synthesis of Ceramic powder
Synthesis of Boron Nitride powder by carbothermal method, using phenolic resin and carbon black and investigating the effect of additive of calcium carbonate [Volume 9, Number 2] |
 |
Taguchi
Optimizing the effect of sintering parameters and the amount of graphene on the hardness and fracture toughness of ZrB2-SiCn composite by Taguchi method [Volume 12, Number 0] |
 |
Taguchi
Taguchi Experimental Design for optimizing sol-gel combustion synthesis conditions of YAlO3 nano powder [Volume 2, Number 4] |
 |
Taguchi method
Parametrs controlling by Taguchi experimental design for synthesis of MgO-CeO2 nano powder [Volume 2, Number 3] |
 |
Theranostics agent
Considering the Effect of Oxygen Group on the Magnetic Properties of Reduced Graphene oxides (RGOs) [Volume 9, Number 1] |
 |
Thermal Oxidation.
Investigating The Effect of Adding TiB2 on Mechanical Properties and Thermal Oxidation Behavior of ZrB2-SiC-TiB2 Nanocomposite Sintered By Pressureless Method [Volume 12, Number 3] |
 |
Thermal barrier coating
Investigation on Thermal Expansion Behavior of Yttria and Ceria Stabilized Zirconia to Thermal Barrier Coatings [Volume 5, Number 2] |
 |
Thermodynamic analysis
Synthesis of WC-8Co cermet powder in WO3-Co3O4-C system by in situ carbothermic solid reduction method under hydrogen atmosphere: (phase, microstructural and thermodynamic analysis) [Volume 11, Number 3] |
 |
Tissue Engineering
Nanocomposite Based on Albumin Protein and Review of Its Applications in Medical Engineering [Volume 9, Number 4] |
 |
Total Dissolved Solids.
Preparation of Ceramic Composite Filter with Titanium Oxide Nanoparticles and Active Carbon Content for Treatment of Sea Water [Volume 8, Number 1] |
 |
Tribological behavior
Effect of milling on microstructure, mechanical properties and wear resistance of Al2O3/Ni cermets [Volume 12, Number 2] |
 |
Tribological properties
Investigation on Mechanical and Tribological Properties of HA/UHMWPE Nanocomposite as a Bone Substitute with Nanoindent and Nanoscratch Method [Volume 3, Number 2] |
 |
Two-photon absorption
Increased two-photon reverse saturable absorption in ZnO/TiO2 core/shell nanocomposites [Volume 7, Number 2] |
 |
Type of fuel.
Characterization of Ni0.5Zn0.5Fe2O4 Ferrite Synthesized by Solution Combustion method in the Presence of Urea and Glycine as fuels [Volume 6, Number 1] |
 |
UGa2 ؛ UGe2
Investigation of optical and magnetic properties of UY2(Y=Ga,Ge) compositions [Volume 11, Number 3] |
 |
UHTCs
Fabrication and inspection of C/Cf-ZrB2-ZrC-SiC and C/Cf-ZrB2-SiC composite parts resistant to ablation by pressureless sintering method [Volume 11, Number 1] |
 |
UHTS.
Investigating the effect of nano SiC particles on fracture toughness and oxidation behavior of ZrB2-ZrC-SiC composite produced by PS method [Volume 12, Number 2] |
 |
UV.
The Effect of thickness parameter and Fluorine Dopant on Photocatalytic performance of TiO2 thin films [Volume 7, Number 4] |
 |
Wastewater antifreeze
Improvement of Photocatalytic Properties of Titanium Oxide Nanoparticles (TiO2) Doped with Cerium Atoms and Evaluation of Methylene Blue Dye and Wastewater antifreeze Treatment [Volume 8, Number 3] |
 |
Wear mechanism
Effect of SiC nanoparticles addition on mechanical properties and wear resistance of cemented carbides fabricated by spark plasma sintering [Volume 10, Number 4] |
 |
Wear resistance.
The effect of TiO2 concentration on microstructure, corrosion behavior and wear behavior of Ni-P-W-TiO2 coating [Volume 10, Number 1] |
 |
XRD
Mineralogy and consideration of backing conditions of Chogha Zanbil historical bricks [Volume 4, Number 2] |
 |
XRD
Corrosion Resistance Study of Nanostructure Zirconium Carbide Coatings [Volume 5, Number 2] |
 |
XRD
Facile Synthesis of TiC Powder Through Microwave- Assisted Self-Propagating High-Temperature Synthesis [Volume 4, Number 4] |
 |
Zirconium Carbide
[Volume 10, Number 3] |
 |
Zonuz kaolin and CaCO3.
Effect of mineral type, calcination and calcium carbonate addition on the nickel cation adsorption of clays [Volume 6, Number 3] |
 |
ablation
Investigation of ablation resistance of SiC/ZrB2 multilayer graded coating produced by argon shrouded plasma spray method under propane flame [Volume 10, Number 1] |
 |
address layer
Layering methods and properties of Tantalum Nitride thin layers: A review [Volume 12, Number 2] |
 |
agriculturalwaste
Investigation of effective parameter of activated carbon preparation by chemical activation with Taguchi Method [Volume 3, Number 2] |
 |
aluminothermic reaction.
WC-Al2O3 Composite Synthesis via Microwave Heating of Mechanical Activated WO3-Al-C Mixture [Volume 2, Number 4] |
 |
aluminum
Study on the strengthening mechanisms and failure modes of the ultra-fine grained tri-modal Al5083-5wt. %B4C-Al2024 and Al5083-5 wt. %B4C-Al5083 composites [Volume 7, Number 4] |
 |
and weight percentage of CaO.
Effect of Al2O3:Y2O3 molar ratio and amount of CaO on the sintering of SiC composite [Volume 12, Number 4] |
 |
application.
Theoretical foundations morphology new technology of smart materials with magnetic shape memory alloys and their application in various industries [Volume 11, Number 4] |
 |
ball-milling
Fabrication and optimization of Al(Zn)-/Al2O3–AlxCuy composite by mechanical alloying and combustion synthesis [Volume 5, Number 3] |
 |
band gap energy.
The effect of increasing of iron concentration on the physical properties of zinc-iron ferrite nanoparticles [Volume 8, Number 2] |
 |
band gap energy. Antibacterial properties
Synthesis and Investigation of Structural, Magnetic and Antibacterial Properties of Calcium-Magnesium Ferrite Nanoparticles by Thermal Treatment Method [Volume 9, Number 3] |
 |
bandstructure.
Calculation of electronic, structural and optical propreties of Sr2NiWO6 in two phase by FP-LAPW method [Volume 10, Number 2] |
 |
bearing area.
Study of effect of annealing temperature on optical density, topography and structural properties of zinc oxide films and zinc oxide films doped with aluminum [Volume 10, Number 1] |
 |
brand equity
Effective employment brand equity through sustainable competitive advantage, marketing strategy, and corporate image in ceramic tile factories in Iran [Volume 7, Number 4] |
 |
cation exchange
Investigation on cation uptake properties ofCaO:Al2O3:SiO2compounds synthesized by chemical route [Volume 3, Number 3] |
 |
caustic soda
Investigating the physical and mechanical properties of cement-based composites reinforced with ceramic and polymer exposed to sulfate attack [Volume 12, Number 2] |
 |
chemical durability
Investigation of Electrical and Chemical Properties of an especial Enamel for Ni-Cr Wire-wound Resistor [Volume 3, Number 3] |
 |
complex decomposition
The Effect of Temperature on the Lateral Phase Formation for the CuInS2 Nanoparticles synthesized by Thermolysis [Volume 5, Number 4] |
 |
composite
Reduction Effect on Microstructure and Mechanical Properties of Alumina-Cobalt Composite [Volume 5, Number 1] |
 |
composite-metal-ceramic targets
Numerical analysis of low velocity impact on ceramic-metal-composite targets [Volume 10, Number 3] |
 |
compressibility curve.
Effect of zirconia nanoparticles on physical properties and compressibility of synthesized zirconia powders by co-precipitation method [Volume 1, Number 1] |
 |
compressive strength
Influence of initial freezing temperature on microstructure and mechanical properties of porous hydroxyapatite in freeze casting method [Volume 3, Number 2] |
 |
corrosion behavior.
Investigation of corrosion resistance of ceramic coating on the surface of 6061 Al alloy created by plasma electrolytic oxidation technique [Volume 5, Number 4] |
 |
corrosion resistance.
Investigation on the effect of applied current density on the morphology and corrosion properties of Titania coating produced by Plasma Electrolytic Oxidation [Volume 6, Number 3] |
 |
cristobalite
Effect of Sintering Temperature and Time on The Cristalization and Microstructure of Fused Silica Ceramics Prepared by Gel Casting [Volume 5, Number 1] |
 |
crystal structure
Controlling morphology and crystal structure of cadmium selenide by changing the ratio of ethanol amine and ethylene diamine in their mixed solution. [Volume 1, Number 3] |
 |
current
The Effects Of Interfacial Roughness On The Argon Ion Implanted Tantalum Films [Volume 11, Number 2] |
 |
degradation
A Comparative Study of Low Voltage SnO2- and ZnO- Based Varistor Properties [Volume 3, Number 1] |
 |
dense bodies
The effect of CaO-Al2O3 system additives on densification and properties of silicon carbide [Volume 3, Number 3] |
 |
density
Investigation of properties W-ZrC composie made of different molar ratio between WC and ZrO2 [Volume 4, Number 2] |
 |
dielectric propertie
Sinterability, Crystallization Behavior and Microwave Dielectric Properties of Mullite Microparticles-ZBS (ZnO-B2O3-SiO2) Glass Composites [Volume 4, Number 4] |
 |
distribution of particles size.
Investigating the effect of size and distribution diamond nanoparticles on hardness and light transmission of Zinc Sulphide/diamond nanocomposite [Volume 7, Number 2] |
 |
electrical conductivity
Effect of deposition time on surface topography and electrical conductivity of carbon-nickel composite films [Volume 5, Number 3] |
 |
electrochemical impedance spectroscopy
Investigation of Microstructure and Corrosion Resistance of Ceramic Coating Created on 2024 Aluminum Alloy by Plasma Electrolytic Oxidation [Volume 5, Number 1] |
 |
electronic properties
Investigation of structural and electronic properties of UY2(Y=Ga,Ge) [Volume 9, Number 3] |
 |
electrostriction
Electrostrictive Behaviour of Lead-Free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 Piezoceramics [Volume 4, Number 4] |
 |
ferroelectric.
Studying the effects of adding CeO2 and CuO on electrical properties of lead free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 piezoceramics [Volume 9, Number 1] |
 |
ferrofluid
Investigation on colloidal stability of iron oxide nanoparticles in water based ferrofluid using comb polymeric surfactants [Volume 1, Number 1] |
 |
fracture toughness
Influence of nano-graphite addition on hardness and fracture toughness of ZrB2-SiC composites fabricated by spark plasma sintering [Volume 6, Number 4] |
 |
genetic algorithm
Optimization of Grading Tile Using Fuzzy Image Processing and Genetic Algorithm [Volume 4, Number 3] |
 |
glass-ceramic
Investigation effect of stabilized-zirconia on structure of nanocomposite calcium phosphate glass-ceramic/zirconia [Volume 1, Number 2] |
 |
gram positive bacteria.
Synthesis and study of microwave irradiation time effect on the antibacterial bioassay of ZnSe nanocrystals at the presence of two gram-positive Staphylococcus aureus and Bacillus cereus bacteria [Volume 7, Number 3] |
 |
granulation
Production of YSZ powder using the co-precipitation method for thermal spraying [Volume 12, Number 1] |
 |
heat treatment
Determining the optimum temperature of heat treatment to reach the nano-structured hydroxyapatite coating [Volume 7, Number 2] |
 |
impurities
The Role of Factors Influencing the Optical Properties of Yttrium Aluminum Garnet Ceramic Body [Volume 8, Number 3] |
 |
kaolinite structural order
The thermal activation and investigation of the structural order of kaolinite in kaolin and ballclay [Volume 5, Number 4] |
 |
ladle
Simulation of refractory thickness effect on liquid steel temperature drop by finite elements method [Volume 3, Number 2] |
 |
magnetic properties
The effect of reducing agent in partial reduction of barium ferrite and production of magnetic nano-composites [Volume 1, Number 2] |
 |
mass transfer
Modeling drying process of saturated clay and drying shrinkages [Volume 3, Number 1] |
 |
mass transfer
Investigation on the Role of Porosity in the Structure of Historical Ceramics [Volume 10, Number 3] |
 |
mathematical model.
An investigation aboutoxidation of magnetite to hematite during preheating of an iron ore concentrate pellet using a DOE method [Volume 2, Number 2] |
 |
mechanical activation
The Influence of Mechanical Activation on Microwave Combustion Synthesis of Al2O3-B4C Composite Powder [Volume 4, Number 4] |
 |
mechanical activation
Feasibility of microwave-induced carbothermic -SiC from activated rice husk ashsynthesis of [Volume 3, Number 4] |
 |
mechanical properties
Investigation on microstructure, mechanical properties and pressureless sintering behavior of ZrB2-SiCnano/micron composites toughened by AlN [Volume 5, Number 4] |
 |
mechanical properties
Dence machinable glass-ceramic composite fabricated via sintering of CPNT and CPMSF based glass- ceramics [Volume 3, Number 4] |
 |
mechanical properties
Effects of the fabrication parameters on the phase composition, densification and mechanical properties of alumina-chromium cermets fabricated by combustion synthesis method [Volume 2, Number 1] |
 |
mechanical properties
The Effect of Aluminium Borate and Magnesia on the Mechanical Properties and Microstructure of Corundum- Mullite Bodies [Volume 4, Number 4] |
 |
mechanical properties
Investigating the effect of Nickel oxide on the microstructure and mechanical properties of zirconia Nanocomposite stabilized by Yttria and prepared by spark plasma sintering [Volume 11, Number 4] |
 |
mesoporous.
Effects of synthesis condition on the characterization of AlOOH nano-particles [Volume 2, Number 2] |
 |
micro structure
The Influence of Electrophoretic Deposition Parameters on Transparency of Alumina Produced by SPS [Volume 6, Number 1] |
 |
microstructure
Microstructure and properties of vanadium oxide (VOx) thin films prepared in a reactive magnetron sputtering system [Volume 3, Number 3] |
 |
microstructure.
The effect of time and Co2+ dopant on phase evolution, microstructure and optical properties of CuInS2 nanoparticles synthesized by hydrothermal method [Volume 10, Number 1] |
 |
milling time
Investigation on the effect of time of milling and temperature on synthesis of nanostructure Ti3SiC2 by Mechanical alloying – heat treatment method [Volume 5, Number 3] |
 |
morphology.
Synthesize of Porous Calcium Titanate Micro-Cubes via Hydrothermal Method [Volume 4, Number 3] |
 |
mullite
The effect of TiO2 on the electrical strength of silica porcelain insulators [Volume 2, Number 2] |
 |
nano particles.
Synthesis of zirconium carbide nanoparticles by sol-gel method and determination of powder characteristics [Volume 8, Number 4] |
 |
nanocatalysts
Optimization of the catalytic activity of gold nanoparticles immobilized on different types of carbon for benzyl alcohol oxidation [Volume 10, Number 2] |
 |
nanocomposite
The photocatalytic activity of Ag/CNT on mesoporous TiO2 investigation by Methyl Orang degradation [Volume 5, Number 3] |
 |
nanocomposite.
Rhological Behavior of Injectable Bioactive Glass/Gelatin Pastes Used for Bone Replacement [Volume 8, Number 2] |
 |
nanocomposites- pressureless sintering - ZrB2 - B4C - mechanical properties
Investigating the Effect of SiC and B4C and Pressureless Sintering Temperature on Mechanical Properties and Isothermal Oxidation Resistance of ZrB2-SiC-B4C Nanocomposites. [Volume 6, Number 2] |
 |
nanolayer ceramics
Investigation of effect of Chemical composition of the preform on nano-layered Ti3SiC2 max phase synthesis using reactive melt infiltration process (RMI) [Volume 10, Number 4] |
 |
nanoparticles
Effect of Synthesis Temperature on morphology of ZnO Nanoparticles in Hydrothemal Method [Volume 1, Number 3] |
 |
nanostructure
Investigation of Kinetics and Thermodynamics of Fluoride Ions Removal from Aqueous Solutions by Nanostructured Hydroxyapatite [Volume 3, Number 3] |
 |
nanostructured electrode
Investigation of electrochemical properties of cobalt phospho selenide nanostructured electrode in hydrogen evolution reaction. [Volume 11, Number 4] |
 |
nickel-boron electroless
Effect the amount of C2H8N2 complexing agent on coating of B4C powder by nickel-boron electroless plating method [Volume 6, Number 4] |
 |
nitriding atmosphere
Effect of heat treatment atmosphere on the formed phases in magnetite glass ceramic in SiO2-B2O3-Fe2O3-Na2O-ZnO system [Volume 3, Number 2] |
 |
optical property
Optical property of glass and nano-srtucture glass-ceramic SiO2-Na2O-CaO-CaF2 doped with Cr2O3 [Volume 2, Number 4] |
 |
osteogenesis.
Effect of Graphene Oxide Nanoparticles Addition on Mechanical and Biological Properties of Calcium Phosphate Cement [Volume 7, Number 4] |
 |
oxidation resistance
Synthesis and evaluation of chromium nitride films in magnetron sputtering system with application to the substitution of hard chromium [Volume 3, Number 4] |
 |
oxidation.
Investigating the influence of ZrB2-ZrC-SiC powders amount on density and resistance to ablation of C/C-ZrB2-ZrC-SiC composite built of carbon fabric and felt developed by the method of pressureless sintering [Volume 12, Number 1] |
 |
paint adhesion
Investigating the concentration of compounds containing acid and nitrate / nitrite in the optimization of phosphate bath composition [Volume 12, Number 4] |
 |
photocatalyst
Synthesis, characterization and photocatalytic activity of doped Ag/TiO2-ZnO nanocomposite for MB dye degradation under visible light and UV-A light [Volume 7, Number 1] |
 |
photocatalyst
Investigation of plasma treatment effect of N2+O2 mixture plasma on the photocatalytic properties of titanium dioxide thin films [Volume 5, Number 4] |
 |
photocatalytic
Synthesis of mesoporous TiO2-SiO2-Ag and investigation of its structural and photocatalytic properties under visible light and ultra-violate [Volume 9, Number 4] |
 |
plating time.
Effect of nickel electroless plating time on the coating of SiC powder [Volume 7, Number 1] |
 |
poly methyl methacrylate
Investigation The Effect Of Polyethylene Glycol and Polymethyl Methacrylate Surfactants On The Physical And Radar Absorption Properties (X and Ku Bands) Of Barium Hexaferrite Synthesized By Sol-Gel Combustion Method [Volume 5, Number 1] |
 |
porous materials
Survey on influence of starch addition on gel casting of porous alumina bodies [Volume 6, Number 2] |
 |
potentiodynamic polarization.
Effect of coating time on the corrosion behavior of ceramic coatings containing hydroxyapatite nanoparticles by plasma electrolytic oxidation method on AZ31 Mg alloy in simulated body fluid [Volume 10, Number 4] |
 |
precipitation method
The effect of Barium addition on microstructure and photoluminescence properties of CaWO4 [Volume 4, Number 3] |
 |
pressure test
Fabrication of an Al/(Al2O3+AlxVy) In-Situ Composite: Investigation of Phase Evolution, Microstructural and MechnicalPropertice [Volume 2, Number 3] |
 |
sensing.
Electrochemical detection of lead ions in water based on manganese oxide nanostructures [Volume 12, Number 3] |
 |
sinterability.
The effect of powder type and CaO additive on properties of sintered SiC by pressureless sintering in additive system of Al2O3-Y2O3-CaO [Volume 8, Number 4] |
 |
sinterability.
The effect of silicon particle size on pressureless sintering of boron carbide nano composites [Volume 2, Number 2] |
 |
specific surface area
synthesis of mesoporous tungsten oxide by soft templating methode using tungstic acid precursor [Volume 4, Number 3] |
 |
spectrophotometer
Effect of adding different oxides on opacificationmechanism and chemical durability of spontaneous Opal Glasses containing zinc oxide. [Volume 2, Number 1] |
 |
stability
Comparing on Dispersion of Iron Oxide Nanoparticles in Kerosene and Water Media [Volume 1, Number 3] |
 |
surface resistance
Coating of vanadium dioxide thermochromic thin film on glass via sol-gel method [Volume 6, Number 1] |
 |
synthesis
Tow-Step Synthesis of Aluminum Oxynitride (AlON) via Carbothermal and Nitridation Route [Volume 8, Number 2] |
 |
toughness
The effect of AlN whiskers addition on pressureless sintering behavior of ZrB2-SiC composite [Volume 4, Number 2] |
 |
viscous flow
Study of the effective Parameters on the properties of fused silica bodies formed by cold isostatic press [Volume 3, Number 4] |
 |
wettability
investigation on the wettability behavior of CuxO / blackTiO2 photocatalyst nanocomposite on copper foam by combining anodizing and sol-gel methods [Volume 10, Number 4] |
 |
white index
Translucent tile construction and its properties [Volume 8, Number 3] |
 |
zinc ions
Investigation of the effect of calcination temperature on the properties of titanium dioxide nanoparticles and kinetic evaluation of the adsorption process of zinc (II) ions from aqueous solution by them [Volume 11, Number 4] |
 |
zirconia phase transformation
Investigating the effects of Magnesia addition on properties, phase transformation and microstructure of gelcasted Zirconia bodies [Volume 9, Number 3] |